Top Social

Burp Cloth Tutorial (Field-Tested)

1.30.2012

When I found out I was pregnant, one of the first things I did was start buying fabric for burp clothes.  Easy and cute and I finally had an excuse to buy some kids fabric besides giving it away to other people. There are precisely 23894 tutorials on the blogosphere for how to make them and I did the whole sewing fabric on a diaper method (don’t worry, I go into greater detail in the actual tutorial).

burp cloth tutorialburp cloth tutorial

They did look prettier before they were washed a million times.

burp cloth tutorial

I made over 20 like this and thought I was golden.  Because we were not going to have an urper anyway so they would just sit pretty in their box.

And then Carter made his arrival.  And he had reflux. IMG_7440

Which meant that burp clothes became a constant fashion accessory.  And that you did not get nice clothes on for work until you were literally walking out the door in case he erupted. 

You should be thanking me for not sharing a picture of him actually spitting up.  Because we have them.

Anyway with all the urping going on, the diaper burp clothes I made were showing their weaknesses.  Namely that they are too wide for shoulders and were constantly falling off. Leaving your shoulder in a vulnerable position.  Not to mention your back.

My friend Lauren made us some thinner ones which worked so much better (and matched his nursery too- bonus!).

IMG_4678

So taking her thin design and adding some flannel for some extra “stickiness” I have now perfected the burp cloth.  At least think so.  Now if I just find the time make some more of them…

Ready for the How-To?

Materials:

Printed Cotton Fabric (approximately 9x18- a fat quarter works well)

Flannel Fabric (double the size of the printed fabric)

Scissors or Rotary Cutter

Sewing Machine

Iron

How To:

1. Cut your fabric larger than the size you are thinking of making your burp cloth and pre-wash it to get the shrinking thing out of the way.

2. Cut your now shrunk printed fabric in a 9 in x 18 in rectangle.  This size can be varied, I cut the three burp clothes I made at slightly different widths depending on how much fabric I had.  This is not an exact science.burp cloth tutorial

3. Cut two flannel squares the exact same size you cut the printed fabric.

4. Line up your three squares right on top of each other with right sides together. (In the picture the three pieces are fanned out slightly so that you can see the order…when you sew make sure they are right on top of each other).burp cloth tutorial

5. Sew around the 4 edges, and stop before you reach where you started, leaving a three inch opening to flip it out.  I used a quarter inch seam.

burp cloth tutorial

6. Cut your corners of the sewn fabrics.  Be careful not to cut the seam. Press open the seams.

burp cloth tutorialburp cloth tutorial

7. Stick your hand in the opening and pull it right side out.  The second piece of flannel stays in the middle for extra urping absorbency.  Make sure to spend some time poking out the corners.burp cloth tutorial

8. Press well so it lays flat.  Make sure to press the flaps where the opening is in so that it matches the rest of the seams.burp cloth tutorial

9.  Edge stitch around the all 4 edges to finish it off and to complete the area with the opening.

burp cloth tutorial

10.  And you are done!  Super fast and easy.

burp cloth tutorial

One side is cute, the other side is sticky and the extra piece of flannel will help absorb the urping.  Not to mention it is skinny enough not to be sliding off your shoulder.

burp cloth tutorial

Tie it up with a bow and it also makes the perfect shower gift.

burp cloth tutorial

Happy Urping!

Paneling?

1.16.2012

Wood paneling and and electric fireplace.

In our basement.

Think we have lost our mind?  Because those three thing conjure up images a really bad, old, dark, cave like space.  The type we would be ripping out and renovating.

When we checked out at the home improvement store I was really hoping the cashier was not judging us for what we had in our cart….because I know I would have been.

But I love how it turned out…

cedar paneling on fireplace

The basement was feeling a little cold with all the tile and well, because it is a basement and it is cold. And the wood really brings a warmth to the space.  The heat radiating from the fireplace does not hurt either.  Oh and did I mention it was cheap?  The wood cost us less than $125. 

So how did we do it?

Well we started with a dry walled space that was designed to hide two oddly placed poles.  The entire reason for the fireplace in the first place.IMG_6374

It was built to the dimensions of the fireplace we had already ordered but we just needed something to surround it.  Tile?  Expensive, time consuming (with all the corners) and the fireplace structure was not completely square to cover the poles which would be made obvious if we spaced square tiles on top of it.  Hardwood flooring?  Viable option but the exotic stuff we really liked was still a little pricy and all the edges would have to be mitered.  So we headed to the lumber section when we stumbled on this.

IMG_6373

Cedar paneling. 

Really.

Using liquid nails, a saw, a nail gun and a level it became this rather quickly.  Holes were filled with stainable wood filler and sanded.

cedar paneling on fireplacecedar paneling on fireplace

We tried a lot of different stains on samples and settled on English Walnut by Minwax.  We then learned that stainable wood filler needed to be completely sanded off otherwise you could see every spot.  We cursed and re-sanded. A lot. At least with the cedar it smelled nice. This is what you get when you normally paint instead of stain and don’t know what you are doing.

A coat of stain and two coats of satin poly later, we were ready to install the fireplace. 

cedar paneling on fireplace

It slid right in.

cedar paneling on fireplace

We are happy with the choice to go with an electric fireplace.  Gas would have been better and with more options, but would have been more expensive. Especially considering needing to hire someone to run a gas line and vent it properly.  Ouch.  Not to mention I am not sure we would have been able to face it with wood considering fire implications.

We watched a video of the electric model we chose on YouTube before we ordered it and were happy on how authentic it looked.  (Yes people really make YouTube videos of fireplaces. Oddly helpful.) I have to admit I was nervous before we fired it up that it would look cheesy, but we are completely satisfied with it.

The next question we will probably get is why it is facing the stairs.  Here is what you see as you walk down them and enter the basement…

IMG_6976

We went back and forth on this as well.  We chose the side we did because if it was a solid wall it would have looked funny.  If I had enough space to put a console table there with a large picture, it would have been different, but there was not enough room to do that.  So my choices were solid wall of something (tile, wood) or fireplace.

The opposite side is next to the poker table (aka Christmas wrapping central).

cedar paneling on fireplace

So people’s backs would be facing it and it would be less of a focal point.  We thought about putting another fireplace on the back side (so it would look “double sided”) but that would have increased the cost by having to buy two fireplaces and the wall would have to be thicker and take up more floor space.  Not a good option.

Now that it is in and we are starting to get furniture down there, I am confident we made the correct decision.

Floorboards need to be cut and painted and some furniture is being delivered in the next couple of weeks which is exciting to see more pieces come together. 

Which is good because all the great toys Carter received for Christmas need a place to live besides the family room. 

Quick Change Trousers

1.08.2012

If you have ever shopped for baby clothes, you know that girls win it hands down in the cute category.  You have tutus and dresses and tights and lace and…then I have to remove myself to the boys section before he ends up in a skirt.  But whipping up a couple of pairs of Anna Maria Horner’s Quick Change Trousers from her Handmade Beginnings book helped.IMG_6431

Because every boy needs dinosaur pants.

IMG_6436

These were my first pair and I just used some cheap fabric from Joann’s in case I messed them up.  Well other than the scrap on the butt.  If you have an eagle eye you can see that Carter’s butt matches his quilt.  I so meant to do that.

IMG_6458

They are also reversible so if he is having a more stripe kind of day, no problem.

IMG_6428

They are also helpful for discovering your feet.

IMG_6448

And set off a plain white onesie quite nicely.  Because let’s me honest, if you are wearing dinosaur pants you need something pretty neutral on the top half.

Carter loved his pants so much I made some more.  Every baby also needs Christmas pants.

IMG_6528

IMG_6535

Well I actually made three.  Not that Carter needed three pairs to properly celebrate the holiday, but his two baby pals needed some as well. 

IMG_6564

Carter decided the sock monkeys set off his Christmas drool bib and candy cane socks nicely for lounging around the house on Christmas Eve.  His dad thinks I am channeling MC Hammer, but nothing says “festive” like monkeys in santa hats.

IMG_6558

And they are super comfortable for bib eating…IMG_6603

As well as present opening wrapping paper eating.

And I have already bought some fabric to make some more…this time I am thinking bears with a shot cotton lining.  Only this time I will make the legs a little shorter and the waist a little bigger.  Yep Carter hopes those proportions reverse themselves as he gets bigger.  But for right now we are all loving on the pudge.  In animal pants especially.