But now we love it.
Really really love it. (Photos taken in a basement with no natural light do not do it justice, trust me, I tried).
Why a Murphy bed? Well, we have a four bedroom house and we are not moving. When we have another child sometime in the future, we will need that last bedroom. And getting rid of the craft room was not an option that I liked. The guest room was the least used, but with out of town grandparents, it was still a necessity.
There is a bathroom in the basement, along with a TV and some empty space (and exercise equipment and a fridge and tons of toys if you are so inclined). Bingo. New Guest Room on an as needed basis.
The bed was going to be Queen Size, so the cabinet was going to be a predominant feature in the space. We thought about making the facing look like an armoire, but I wanted something more interesting. Enter the faux library card catalog.
So how did we do it? We bought hardware that came with plans online (here). And Derek and my father-in-law built the basic bed according to those plans. They used predominantly plywood for the actual construction of the cabinet.
Then came the drawers. After a whole lot of math by the boys, we settled on 102 of them. One of the challenges was the foot of the bed had to be in a certain place and a certain size. Since it would hold the bed while people were sleeping in it, it was important.
The drawers were cut out of 3/4 inch MDF because of cost. Then all the edges were routed. Bless my father-in-law with that stack of drawers.
The drawers were nailed on in rows with a paint stick used as a spacer horizontally and flat molding nailed on vertically.
We talked about adding molding on the top or on the sides, but after extensive research on library card catalogs (I’m looking at you Google Images), we decided to leave it plain to make it more “authentic”.
And then I finished it using a modified glazing technique. Which will be a story for a another post. Sneak peek: It took forever, may have involved some tears and cussing but I think the results were worth it. I learned a lot. Stay tuned.
After it was finished, it was time to install the hardware. Which was another challenge with this project. When you need 102 pieces of hardware, they can’t be $7 a pop. Especially since they are completely decorative and non-functional.
After much searching, I found my pulls here (but if you are buying them in bulk, check out their store on eBay). At about a dollar each they were the winners. When they arrived they were shiny in fake brass kind of way, so I aged them. I tried a variety of methods with different results, (bringing me back to my junior high science fair days) with a clear winner. Again another post. Now they look old and worn.
Derek constructed a jig to make sure they went on straight. And then he had the super fun task of screwing on every.single.one.
We brought down the mattress from the guest room, and the new guest suite was born.
Just pop open the leg and the mechanism releases.
Add some pillows and a quilt and we are ready for guests.
And the majority of time when it is closed and being played around, it is just nice to look at.
And we can tell Carter about the good ole days when that was the way you looked up books.
And he will look at us like we have three heads.
Murphy Bed Hardware and plans- approximately $300
Lumber-About $300 (rough estimate as we were also buying supplies for other DIY projects at the same time)
Glazing Supplies- $15 (I already had the glaze itself from previous projects)
Mattress- $0 (used the one from the guest room)
Not bad for a incredibly functional yet nice-to-look-at piece of furniture.
We loved this project (especially now that it is done) and it is DIYable. My father-in-law used to work as a contractor/carpenter so his skills were a huge help to Derek with the construction while he was in town. But if you are good with DIY and furniture building, we think you would be able to handle it, as the plans come along with the hardware. Also as I mentioned before, this was not a fast project. The actual construction took Derek and my father-in-law a weekend. But the finishing and the hardware application kept us busy for awhile.
But worth it. What do you think?